Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that prevents your car from starting if it does not have an exclusive pin code sequence that is entered via existing buttons (such as buttons on the dashboard or on the steering wheel). The device is inaccessible to thieves and operates quietly.
It can be helpful in preventing hotwiring, and newer methods such as relay thefts. You may also see a reduction in your insurance cost.
No Radio Frequencies
A ghost immobiliser is different from a traditional one in that it doesn't transmit radio frequency, making it impossible for thieves to get around the device by using a low-cost key cloning device. This means that a ghost immobiliser will stop your car from being started even if a thief has successfully cloned your key or stolen it.
Ghost immobilisers are also effective against relay attacks. These involve amplifying the signal from your key fob to trick the system into allowing your vehicle to start. The Ghost can recognise this and won't start your vehicle, and require you to enter your PIN code. This is a great method to deter thieves with a technological edge who have access to inexpensive and simple-to-use tools to copy or steal your car.
The Ghost can also be fitted discreetly (without doing any damage to your vehicle) and will only work after the proper pin sequence has been entered. This will only be known by the person who installed it, which means that no one can access your vehicle without knowing your pin code. Some systems allow owners to set up a service or valet mode to temporarily allow someone else to drive the vehicle without revealing their pin code, safeguarding them from thieves who are looking for opportunities.
The Ghost is not just easy to use and quick to dearm, it can be connected to a car tracker, so that you can locate your vehicle. Certain insurance companies offer discounts on insurance for vehicles with Ghosts installed. This is great news as it enhances the security of your vehicle.
The Ghost immobiliser, although not Thatcham certified, is an aftermarket product that has been independently evaluated and confirmed to function. Ask the seller of a secondhand vehicle that has the Ghost installed to transfer it to your car. This will make your new vehicle more secure than in the event that the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that if the car has been stolen, thieves won't be able to start it. The thieves will need to be aware of the buttons used to unlock the vehicle, and they will not be able to do that without knowing these sequences. This will deter them further and ensure that they don't attempt the theft in the first place since they might not be able to drive away with the car.
If you have a GPS tracking device installed, the Ghost can function as an anti theft device. It can send a signal that can trigger a siren alarm to notify the tracker about a theft attempt. This feature can be turned on at any time from your online dashboard.
When you connect your Ghost to your CAN data network it will identify the vehicle and its owner through the unique pin code that is programmed during installation. This allows the device communicate with your car's ECU and disable the engine. This means that the engine can only be turned on if it is authorised by the vehicle owner or someone with a valid PIN code.
Since the pin code is created from existing buttons within easy reach of the driver (such as cruise control and stereo mute) it is mathematically impossible to be guessed by potential thieves. Your technician will also provide you with an emergency Pin Code override card which is similar to scratch-off lottery tickets and only requires scratching off to reveal the code and instructions.
Unlike traditional immobilisers which can often be discovered by thieves using diagnostics to read the immobiliser relay the Ghost is indiscernible by these methods as it doesn't employ circuit cuts or radio frequencies. This makes it unaffected by the modern methods used by organised criminal gangs that specialize in RF scanning and code-grabbing technology. It is a lifetime product that is easily removed from your vehicle when you sell it. This means that you won't lose any security that you have invested in.
No Key Fobs
With the rise of vehicle thefts in the UK, proactive measures are needed to protect beloved vehicles from the opportunistic thieves. The groundbreaking Ghost Immobiliser Autowatch's Ghost Immobiliser Autowatch offers a robust defence against key cloning, hacking, and signal relay attacks. It is a discreet and highly effective car security system that is easy to install in a vast variety of vehicles.
In contrast to traditional systems that rely on key fobs, the Ghost immobiliser is not equipped with LED indicators and is not operated via the signal relay. This means it is unaffected by signal interference and can't be activated by stolen or damaged remotes. It is also tamper-proof and has no external wiring, which makes it difficult to remove or disable.
It shields your precious possessions from key-long, hacking and key theft by stopping the engine from starting until you input a unique PIN code. This is achieved by utilising buttons that are already present in the vehicle such as the ones on the steering wheel, door panels and centre console to design a customised disarm sequence of up to 20 times (like entering a PIN in your smartphone).
This is the only way for you to start your engine and it will only work when you have entered the correct pin code. This makes it difficult for thieves who have a chance to steal your car. The system is designed to be easy for you to use. Alternatively, if you're worried about not remembering the pin code, the installer can provide you with an emergency override driver fob that lets you use your car in the same way as you normally would.
The Ghost immobiliser isn't detected by diagnostic equipment, such as RF scanners, or other tools used by thieves. This method of installation is more stealthy, which increases its effectiveness and enables the system to be installed in a location where it would be difficult for thieves to gain access.
Ghost immobilisers can be an affordable and effective way to deter thefts and increase the value of your vehicle. Some insurance providers will also acknowledge them and offer reduced rates.
ghost autowatch immobiliser
If your vehicle is equipped with a ghost immobiliser, you will have the peace of assurance that your vehicle is protected against cloning, hacking, key fob theft and other popular methods of theft. This is particularly important if you have invested an enormous amount of time and money customising your vehicle or own a high-value or rare model. Ghost immobilisers operate silently and do not require any additional parts or installation.
The system allows you to create a pin number that has to be entered to allow the engine to begin. It is activated by buttons on your steering wheel or console, or on the doors. You can alter the sequence at anytime. This means that even if a person knows your pin number, they cannot start your vehicle. The device can also be deactivated in the service valet mode, which allows you to drive your vehicle away for cleaning or servicing without activating it.
This means that even if your vehicle is stolen or cloned the thief will not be capable of starting your car and will be caught in the act. The system will also notify you of any tampering with the wiring system in your vehicle for example, cutting or signal interception and will send the information to your smartphone which allows you to verify that the security of your vehicle is in place at all times.
However, there could be a point at which you're looking to take off or disable the Ghost Immobiliser to prevent maintenance or resale. In this situation, you will have to be extremely careful not to cause damage to the wiring in your vehicle. It is highly advised to wear protective gloves during the process, and utilize a flashlight to illuminate dark areas of your vehicle in which the immobiliser could be. It is also worth referring to any installation documents or user manuals that you might have to pinpoint the specific location of the device.
Then, you can connect the battery to the car and test it to ensure that the immobiliser is working properly and that all electrical components function as intended. You'll need soldering or electrical tape to shield any wires that have been cut. Make sure that there aren't any wires exposed and that any dangling cables are secured using zip ties or another appropriate method. To ensure that your vehicle isn't damaged during the removal process, you should arrange a professional checkup of your vehicle.