Car Ghost Immobiliser
Ghost Immobiliser is an advanced system that prevents your car from starting if it does not have an exclusive pin code sequence, inputted via existing buttons (such as buttons on the dashboard or on the steering wheel). The device is invisible for thieves and is quiet to operate.
It can help to deter hotwiring as well as newer methods like relay thefts. It could also lower the cost of insurance.
No Radio Frequencies
A car ghost immobiliser operates differently to an ordinary immobiliser because there is no radio frequency transmitted to prevent it from being able to be bypassed by thieves using a simple and readily available device for cloning. This means that a ghost immobiliser can keep your car from getting started even if a thief has successfully cloned your key or stolen it.
Ghost immobilisers can also be used to prevent relay attacks. The signal from your key fob is amplified to trick the system to allow your car to start. The Ghost will recognise this and refuse to start the car until you enter the PIN code. This is an excellent way to stop thieves with access to low-cost and simple-to-use tools to copy or steal your vehicle.
The Ghost can also be fitted in a discreet manner (without causing any damage to your vehicle) and will only work after the correct pin sequence is entered. This will only be known by the person who installed it, which means that no one will be able to use your vehicle without knowing the pin sequence. Some systems allow the proprietor to set up a valet mode or service mode, which allows them to let temporarily someone else use their vehicle without revealing their pin code. This protects them from opportunistic thefts.
The Ghost is not just easy to use and fast to dearm, but it can be connected to a car tracker, so you can track your vehicle. Some insurers will offer discounts on your vehicle insurance if it has a Ghost installed which is a great benefit for the security of your car and its contents.
Although the Ghost immobiliser is not Thatcham certified but it is an aftermarket item that has been independently tested and proven to work. If you're thinking about buying a used car with the Ghost immobiliser fitted, then inquire with the seller if they're willing to transfer it to the new vehicle. This will make sure that the new vehicle is more secure than it was if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that when the vehicle is taken away, thieves will not be able to start it. The thieves will need to know which buttons are used to unlock the vehicle and they won't be able to accomplish this without knowing the sequences. This will deter them and prevent them from attempting to steal.
If you have an GPS tracker on your Ghost could also serve as an anti-theft device since it can send an alert to the tracker, which will sound a siren to warn the tracker of an attempted theft. This feature can be activated at any time from your online dashboard.
When you connect your Ghost to the CAN data network, it will identify the vehicle and its owner by using the unique pin code you programmed during installation. This allows the device to communicate directly with the ECU of your car and disable its engine. This means that only the vehicle owner or a person with the PIN code, is able to start the engine.
Because the pin code is constructed from existing buttons that are easily accessible to the driver (such as cruise control and stereo mutes) it is mathematically impossible to be guessed by potential thieves. Your engineer will provide you with a Pin Code Override Card that is like a lottery scratch-off ticket. It simply must be scratched to reveal the code.
Your Ghost isn't detected by these methods, as it does not employ circuit breakers or radio frequencies. This makes it unaffected by the latest techniques used by organized groups of thieves that specialize in RF scanning and code-grabbing technology. It's also a lifetime product, and can easily be removed from your car when you decide to sell it, meaning that you will not lose any of the security that you have put into.
No Key Fobs
With the rise of vehicle thefts in the UK proactive measures are required to protect precious cars from opportunistic thieves. The Autowatch Ghost Immobiliser is an innovative device that provides an effective defense against key hacking, cloning and attacks on signals relay. It's a subtle and highly effective car safety system that is simple to install by anyone.
In contrast to traditional systems that rely on key fobs, the Ghost immobiliser is not equipped with LED indicators and operates through the signal relay. This means it is not affected by signal interception and cannot be activated with stolen or damaged remotes. It is also tamper proof and doesn't have any external wiring, making it difficult to remove or disable.
It safeguards you from key-long hacking as well as key theft by preventing your engine from starting until a unique PIN has been entered. This is achieved by utilising existing buttons in the vehicle like those found on the steering wheel as well as the door panels and the centre console to create a customisable disarm sequence of up to 20 presses long (like entering a PIN in your smartphone).
This is the only way for you to start your engine, and it only works if you have entered the correct pin code. This makes it difficult for thieves to take your vehicle, and is simple to use. If you're worried about forgetting your pin code, you can ask the installer to supply you with a driver's fob that allows you to drive the car in the normal way.
The Ghost immobiliser cannot be detected by diagnostic equipment, such as RF scanners, or other tools used by thieves. This installation that is stealthy improves the effectiveness of the system and allows it to be placed in a place that is difficult for thieves.
Ghost immobilisers are an inexpensive and effective way to deter theft. They can also boost the value of your vehicle. They are also recognized by some insurance companies and can result in lower rates.
No Damage
You can rest assured that your vehicle is secure from hacking and cloning and key fob theft, among other common theft methods, if it's fitted with an immobiliser. This is especially important if you have invested lots of time and money the customization of your vehicle or own an expensive or unique model. Ghost immobilisers operate silently and require no additional parts or installation.
The system works by using buttons on your steering wheel, center console, or door panels, and allows you to create a pin code sequence which must be entered before the engine can be started. The sequence can be changed by you at any time, which means that even if someone knows your pin code it is not possible for them to start your vehicle. It is also simple to disable the device when it is in an unservice valet mode to allow your car to be taken away for cleaning, servicing or an MOT without it being triggered.
ghost 2 immobiliser review means that even if your vehicle is stolen or cloned the person who stole it will not be able to start your vehicle and could be caught. The system can also notify you of any manipulation of the wiring of your vehicle for example, signal interference or cutting. This information can be transmitted to your smartphone to ensure that you are aware of the security status of your car.
You might want to disable or remove the Ghost Immobiliser due to reasons, like for maintenance or for resales. In this case you must be extremely careful not to cause damage to the wiring in your vehicle. It is strongly recommended that you wear protective gloves during the process, and use an emergency flashlight to illuminate the dark areas of your vehicle in which the immobiliser might be installed. It is also worth referring to any installation instructions or user manuals you may have in order to locate the exact location of the device.
After the immobiliser has been disconnected from your vehicle's wiring system, you are able to reconnect the car battery and test to make sure that it is working properly and that all electrical components function according to their intended purpose. You should then connect any wires that were cut, by using electrical tape or soldering where required. Ensure that no exposed wires are present and that any hanging wires are secured by zip ties or other suitable means. Then, schedule a inspection with a professional ensure that the removal process did not damage any other systems in your car.